The Service Tool V3400, and administration instrument V3600, enable you to reset the waste ink cushion counter on some Canon printers:You can fathom the messages blunders “Waste Ink Tank Full” or “Waste Ink Pad Full”, “mistake 5B00” or “Blunder P07” on these printers.
This Service tool v4905 support for G1000, IP2770, IX6560, MP258, MG6170 printer also for G Series, IX Series, IP Series, MG Series, MP Series, MX Series, and PRO Series. Click links below to download for free.
- Download Service Tool v4905 (password : errorandreset.com) or link 2
Canon G1010 Printer Installer
- This Canon Service Tool V5105 is used for making printer adjustments and Waste Ink Counters resets. You can Reset Absorbers counter and other errors: - 5B00 ERROR - 1700 ERROR - 1701 ERROR - WASTE INK PAD RESET - CLEAR INK COUNTER. This Will not work, if you had already used some fake service tool available in market for FREE, and they had.
- Before enabling Function for Notifying the Remaining Ink Level, replenish all inks to the upper limit line and reset the remaining ink level count by running Resets the Remaining Ink Level Count. However, if you reset the count by operating the printer, the setting in the Canon IJ Printer Assistant Tool is unnecessary.
- Pull out the paper output tray and open the output tray extension. Press and hold RESUME/CANCEL button and release it when Alarm lamp flashes 2 times. The nozzle check pattern will be printed. Do not perform any other operations until the printer completes the printing of the nozzle check pattern. Examine the nozzle check pattern.
This software cannot be used for Canon E series and MG24xx series printers. You can download Service Tool v4720 for E series Canon printers.
Service tool v4905 Support OS:
Canon G1010 Reset Tool Mac
- Windows XP
- Windows Vista
- Windows 7
- Windows 8
- Windows 8.1
- Windows 10
Before using this software, make sure your Canon printer can enter into “service mode”, each printer has a different way to get into “service mode”. In general, here’s how to enter service mode on a Canon printer.
- Turn off the Canon printer, don’t unplugging the power cable.
- Press and hold Resume button then press the Power button.
- Keep pressing the Power button and release the Resume button.
- Then press the 5x Resume button.
- Then release all the Power & Resume buttons.
- The power LED will blink and you’re in Service Mode and your printer ready to reset.